CRTC I2M

From crtc.cs.odu.edu
Revision as of 20:22, 25 November 2019 by Ctsolakis (talk | contribs) (Tessellate3D)
Jump to: navigation, search



This page contains instructions for downloading and using the CNF_tools suite developed at CRTC lab in Old Dominion University in collaboration with Jefferson Lab.

This project corresponds to Proposal No.: CNF19-04 (FEMT-002)

A short presentation can be found here

The main component of the software suite is a 3D tessellation software called PODM capable of generating unstructured tetrahedral meshes out of 3D structured data.

The output meshes are in the VTK format and can be visualized using the opensource software Paraview. A short video demo exploring the data can be found here.

Requirements

  • OS: Linux, Windows 10 Pro/Enterprise, MacOS Sierra 10.12+
  • Docker

Installing Docker

Official documentation :

Note for Running on Windows

Docker on Windows uses Hyper-V VMs to run Linux containers. By default, the spawned VMs use 2 vCPUs and 2 GB RAM.

If performance is a concern, it is recommended to edit the Docker settings via the GUI to increase the resource allocation for the VMs in order to allow the tessellation tool (PODM) to to use more threads.

Getting the software

The docker image is located here (restricted access).

Docker Container Instructions

  1. Load the Docker Image.

    First of all, the Docker image needs to be loaded. The following command must be used:

    docker load --input [DOCKER_IMAGE_TAR]

    Note: If the user is not in the docker group, prepending sudo to the above command is necessary.

  2. Running

  • On MacOS/Linux

    docker run -v $(pwd):/data/ cnf_tools <application> [arguments]
  • On Windows with Powershell (recommended)

    docker run -v ${PWD}:/data/ cnf_tools <application> [arguments]

Notice that in this case brackets {} are used instead of parenthesis ()

  • On Windows with command line (cmd)

    docker run -v %cd%:/data/ cnf_tools <application> [arguments]

Where <application> is one of the currently available tools : tessellate2d ,tessellate3d or convert_image.

Tessellation Parameters

A quick way to view all available parameters and brief descriptions for them is to pass the --help flag to tessellate2d/tessellate3d.

Below are more detailed descriptions of the tessellate2d/tessellate3d parameters:

The common parameters for both versions are :

--input [filename] (required)

Input CNF data. Could be ascii/binary NRRD file, an image saved in .vtk format or any other format supported by the ITK library. For more on ITK-supported file formats see here.

--output [filename] (optional)

The filename of the output mesh. (Default: outputMesh.vtk).

--weight-limit [real] (optional)

Set a weight limit for the generated elements that will be used from the sizing function This parameter limits the difference among the weights within one element. It is designed to give some control on the discretization error with respect to the input data.
(Default: 0.1)

--min-edge [real] (optional)

Set the minimum edge size of generated elements that will be used for the sizing function (default: 1). It is designed to be used together with weight-limit controlling the size of the generated mesh. (Default: 1)

Tessellate3D Specific Parameters

--delta [real] (optional)

Controls the size of the elements nearby the boundary. Smaller values will lead to finer detail close to the boundary (and often to a more accurate boundary representation) but will also lead to a greater mesh size. The default value is based on the input size and spacing of the input image.

--threads [int] (optional)

How many threads to use. (Default: 1)

--plc [filename] (optional)

If given, the surface of the produced mesh will be saved into filename in the VTK format.

--memory-limit [int in MB] (optional)

Constrain the amount of memory that will be used. (Default : 70% of the free memory).

--verbose-level [0,1,2] (optional)

Control the level of verbosity. 0 produces no text output while 2 enables extra information. (Default: 1).

--background-value [real] (optional)

Which voxel value to treat as background value. If none is desired, enter a value that does not exists in the dataset. In practice, a background value is a value that is ignored from the tessellation procedure. Regions of the tessellation corresponding to the background value will have no elements. (Default: +inf)

--all-statistics (optional)

Output all statistics (thread and mesh).

--thread-statistics (optional)

Output thread statistics.

--mesh-statistics (optional)

Output mesh statistics.

Tessellate2D Specific Parameters

--uniform (optional)

Create a uniform mesh instead of an adaptive one. --min-edge value will be used as a constant size constraint

--verbose-level [0,1] (optional)

Control the level of verbosity. 0 produces no text output while 1 produces the standard amount of information (Default: 1).

convert_image parameters

convert_image serves as a utility to convert input data between different kinds of image formats. For example the .nrrd images acquired from Jefferson lab cannot be used with Paraview in order to create contour-plots (unknown why). However, converting them using

docker run -v $(pwd):/data/ cnf_tools convert_image input_image.nrrd output_image.vtk 

enables all relevant image filters in Paraview.

Example Dataset

Tessellate2D

add also image and numbers


NT 2D.png

Uniform (left figure):

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input ./CNF_SHARE/2d_wiki_examples/input/NT_140519_50_X.vtk  --output NT_140519_X50_me_2_uniform.vtk --min-edge=2 --uniform

Adaptive (right figure):

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input ./CNF_SHARE/2d_wiki_examples/input/NT_140519_50_X.vtk  --output NT_140519_X50_me_2_wl_1e-1.vtk --min-edge=2 --weight-limit=0.1

Tessellate3D

NT 3D.png

Uniform (left figure):

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_14052019/NT_140519.nrrd  --uniform --delta 1 --output ./NT_uniform.vtk

Adaptive (right figure):

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_14052019/NT_140519.nrrd  --weight-limit 0.07  --output ./NT_adapted.vtk 

More examples can be found here .