CNF Example Meshes

From crtc.cs.odu.edu
Revision as of 13:45, 25 November 2019 by Ctsolakis (talk | contribs) (GPDGK16Numerical_140519)
Jump to: navigation, search

2D Example Meshes

The directory containing the 2D input data is located here.

Synthetic Gaussian Data

  • Input distribution size : 1,000,000 cells
  • Uniform case: 30,949 triangles
  • Adapted case: 3,788 triangles

Commands to generate meshes :

Uniform : mesh file

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input 2D_CASES/input/Gaussian2.vtk  --output Gaussian_me_10_uniform.vtk --uniform --min-edge=10

Adaptive : mesh file

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input 2D_CASES/input/Gaussian2.vtk  --output Gaussian_me_10_wl_1e-1.vtk --weight-limit=0.05 --min-edge=10


GPDGK16Numerical_140519

The 2D case created by extracting a 2D slice at X=50 out of the 3D distribution (see 3D case below) GPDGK16Numerical_140519

  • Input distribution size : 10,000 cells
  • Uniform case: 7,587 triangles
  • Adapted (min_edge = 2) case: 623 triangles
  • Adapted (min_edge = 0.5) case: 1,409 triangles


Commands to generate meshes :

Uniform : mesh file

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input 2D_CASES/input/GPDGK16Numerical_140519_X50.vtk --output GPDGK16Numerical_140519_me_2_uniform.vtk --min-edge=2 --uniform

Adaptive :(min_edge = 2) mesh file

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input 2D_CASES/input/GPDGK16Numerical_140519_X50.vtk --output GPDGK16Numerical_140519_me_2_wl_1e-1.vtk --min-edge=2 --weight-limit=0.1


Adaptive :(min_edge = 0.5) mesh file

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input 2D_CASES/input/GPDGK16Numerical_140519_X50.vtk --output GPDGK16Numerical_140519_me_0.5_wl_1e-1.vtk --min-edge=0.5 --weight-limit=0.1

Note : By using min-edge less than 1 we are essentially generating triangles with an edge smaller that the input pixels. Using values much smaller than 1 is not expected to help the discitization since we are esetially packing more element into a pixel which has constant value.

OBS_ALU_Y50

  • Input distribution size : 10,000 cells
  • Uniform case: 7587 triangles
  • Adapted case: 1018 triangles

The 2D case created by extracting a 2D slice at Y=50 out of the 3D distribution (see 3D case below) OBS_ALU


Commands to generate meshes :

Uniform : mesh file

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input 2D_CASES/input/OBS_ALU_Y50.vtk --output OBS_ALU_Y50_me_2_uniform.vtk --min-edge=2 --uniform

Adaptive : mesh file

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input 2D_CASES/input/OBS_ALU_Y50.vtk --output OBS_ALU_Y50_me_2_wl_1e-1.vtk --min-edge=2 --weight-limit=0.1


NT_140519

  • Input distribution size : 10,000 cells
  • Uniform case: 7587 triangles
  • Adapted case: 1038 triangles

The 2D case created by extracting a 2D slice at X=50 out of the 3D distribution (see 3D case below) NT_140519


Commands to generate meshes :

Uniform : mesh file

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input 2D_CASES/input/NT_140519_50_X.vtk  --output NT_140519_X50_me_2_uniform.vtk --min-edge=2 --uniform

Adaptive : mesh file

docker run -v $(pwd):/data/ cnf_tools tessellate2d  --input 2D_CASES/input/NT_140519_50_X.vtk  --output NT_140519_X50_me_2_wl_1e-1.vtk --min-edge=2 --weight-limit=0.1

3D Example Meshes

CFF_14052019

GPDGK16Numerical_140519: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_14052019/GPDGK16Numerical_140519.nrrd  --weight-limit 0.1 --min-edge 1 --output ./GPDGK16Numerical_140519,d=5,wl=0.1,me=1.vtk

GPDGK16Numerical_140519,d=5,wl=0.1,me=1

GPDMMS13_140519: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_14052019/GPDMMS13_140519.nrrd  --weight-limit 0.05 --min-edge 1 --output ./GPDMMS13_140519,d=5,wl=0.05,me=1.vtk

GPDMMS13_140519,d=5,wl=0.05,me=1

GPDVGG99_140519: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_14052019/GPDVGG99_140519.nrrd  --weight-limit 0.05 --min-edge 1 --output ./GPDVGG99_140519,d=5,wl=0.05,me=1.vtk

GPDVGG99_140519,d=5,wl=0.05,me=1

NT_140519: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_14052019/NT_140519.nrrd  --weight-limit 0.07 --min-edge 1 --output ./NT_140519,d=5,wl=0.07,me=1.vtk

NT_140519,d=5,wl=0.07,me=1

OBS_ALU_140519: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_14052019/OBS_ALU_140519.nrrd  --weight-limit 0.13 --min-edge 1 --output ./OBS_ALU_140519,d=5,wl=0.13,me=1.vtk

OBS_ALU_140519,d=5,wl=0.13,me=1

OBS_CS_140519: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_14052019/OBS_CS_140519.nrrd  --weight-limit 0.01 --min-edge 1 --output ./OBS_CS_140519,d=5,wl=0.01,me=1.vtk

OBS_CS_140519,d=5,wl=0.01,me=1

CFF_DATA

cff_E.data_IM: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_DATA/cff_E.data_IM.nrrd  --weight-limit 0.01 --min-edge 1 --output ./cff_E.data_IM,d=10,wl=0.01,me=1.vtk

cff_E.data_IM,d=10,wl=0.01,me=1

cff_E.data_REAL: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_DATA/cff_E.data_REAL.nrrd  --weight-limit 0.1 --min-edge 1 --output ./cff_E.data_REAL,d=10,wl=0.1,me=1.vtk

cff_E.data_REAL,d=10,wl=0.1,me=1

cff_H.data_IM: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_DATA/cff_H.data_IM.nrrd  --weight-limit 0.05 --min-edge 1 --output ./cff_H.data_IM,d=10,wl=0.05,me=1.vtk

cff_H.data_IM,d=10,wl=0.05,me=1

cff_H.data_REAL: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_DATA/cff_H.data_REAL.nrrd  --weight-limit 0.1 --min-edge 1 --output ./cff_H.data_REAL,d=10,wl=0.1,me=1.vtk

cff_H.data_REAL,d=10,wl=0.1,me=1

cff_Ht.data_IM: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_DATA/cff_Ht.data_IM.nrrd  --weight-limit 0.1 --min-edge 1 --output ./cff_Ht.data_IM,d=10,wl=0.1,me=1.vtk

cff_Ht.data_IM,d=10,wl=0.1,me=1

cff_Ht.data_REAL: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/CFF_DATA/cff_Ht.data_REAL.nrrd  --weight-limit 0.1 --min-edge 1 --output ./cff_Ht.data_REAL,d=10,wl=0.1,me=1.vtk

cff_Ht.data_REAL,d=10,wl=0.1,me=1

DATA_04252019

CFF_E_im: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/DATA_04252019/CFF_E_im.nrrd  --weight-limit 0.04 --min-edge 1 --output ./CFF_E_im,d=5,wl=0.04,me=1.vtk

CFF_E_im,d=5,wl=0.04,me=1

CFF_E_re: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/DATA_04252019/CFF_E_re.nrrd  --weight-limit 0.08 --min-edge 1 --output ./CFF_E_re,d=5,wl=0.08,me=1.vtk

CFF_E_re,d=5,wl=0.08,me=1

CFF_H_im: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/DATA_04252019/CFF_H_im.nrrd  --weight-limit 0.06 --min-edge 1 --output ./CFF_H_im,d=5,wl=0.06,me=1.vtk

CFF_H_im,d=5,wl=0.06,me=1

CFF_H_re: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/DATA_04252019/CFF_H_re.nrrd  --weight-limit 0.13 --min-edge 1 --output ./CFF_H_re,d=5,wl=0.13,me=1.vtk

CFF_H_re,d=5,wl=0.13,me=1

GPD_H_down: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/DATA_04252019/GPD_H_down.nrrd  --weight-limit 0.1 --min-edge 1 --output ./GPD_H_down,d=5,wl=0.1,me=1.vtk

GPD_H_down,d=5,wl=0.1,me=1

GPD_H_up: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/DATA_04252019/GPD_H_up.nrrd  --weight-limit 0.1 --min-edge 1 --output ./GPD_H_up,d=5,wl=0.1,me=1.vtk

GPD_H_up,d=5,wl=0.1,me=1

OBS_ALU: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/DATA_04252019/OBS_ALU.nrrd  --background-value 0 --weight-limit 0.07 --min-edge 1 --output ./OBS_ALU,d=5,bg=0,wl=0.07,me=1.vtk

OBS_ALU,d=5,bg=0,wl=0.07,me=1

OBS_ALU: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/DATA_04252019/OBS_ALU.nrrd --delta 2 --background-value 0 --uniform --output ./OBS_ALU,d=5,bg=0,uniform.vtk

OBS_ALU,d=2,bg=0,uniform

phase_space_000

phase_space_000: Input Image Output Mesh

docker run -v $(pwd):/data/ cnf_tools tessellate3d --input ./CNF_SHARE/phase_space_000/phase_space_000.nrrd --delta 1.5 --weight-limit 0.005 --min-edge 1 --output ./phase_space_000,d=1.5,wl=0.005,me=1.vtk

phase_space_000,d=1.5,wl=0.005,me=1