Difference between revisions of "PDR.TetGen"

From crtc.cs.odu.edu
Jump to: navigation, search
(Compiling PDR (Initial MPI Release))
(Input File Format)
Line 95: Line 95:
 
::# If no holes are present, the optional holes section must be included with a 0.
 
::# If no holes are present, the optional holes section must be included with a 0.
  
The unit cube is provided as an example in cube.poly. The poly file must not contain any leading comments.
+
The unit cube is provided as an example in [http://www.cs.odu.edu/crtc/PDR/meshes/cube.poly.txt cube.poly]. The poly file must not contain any leading comments.
  
 
== Running PDR (Shared Memory Sample Execution) ==
 
== Running PDR (Shared Memory Sample Execution) ==

Revision as of 01:46, 22 September 2017

Parallel Delaunay Refinement (PDR) With TetGen

Overview

The goal of this project is the development of a parallel mesh generator using CRTC’s PDR theory, which mathematically guarantees the following mesh generation requirements:

  1. Stability: the quality of the mesh generated in parallel must be comparable to that of a mesh generated sequentially. The quality is defined in terms of the shape of the elements (using a chosen space-dependent metric), and the number of the elements (fewer is better for the same shape constraint).
  2. Robustness: the ability of the software to correctly and efficiently process any input data. Operator intervention into a massively parallel computation is not only highly expensive, but most likely infeasible due to the large number of concurrently processed sub-problems.
  3. Code re-use: a modular design of the parallel software that builds upon a previously designed sequential meshing code, such that it can be replaced and/or updated with a minimal effort. Due to the complexity of meshing codes, this is the only practical approach for keeping up with the ever-evolving sequential algorithms.
  4. Scalability: the ratio of the time taken by the best sequential implementation to the time taken by the parallel implementation. The speedup is always limited by the inverse of the sequential fraction of the software, and therefore all non-trivial stages of the computation must be parallelized to leverage the current architectures with millions of cores.

The design and implementation of a sequential industrial strength code is labor intensive, it takes about 100 man-years. Parallel mesh generation code is even more labor intensive (by an order of magnitude for traditional parallel machines and expected to be higher for current and emerging architectures due to multiple memory and network hierarchies, fault-tolerance and power aware issues); however, because of the underlying theory that allows code re-use, this initial parallel implementation was achieved in less than six months with impressive functionality, i.e., the same as the sequential TetGen code.

The general idea of Delaunay refinement is based on the insertion of additional (Steiner) points inside the circumdisks of poor quality elements, which causes these elements to be destroyed, until they are gradually eliminated and replaced by better quality elements. It has been proven that this algorithm terminates by producing a mesh with guaranteed bounds on radius-edge ratio and on the density of elements. The main concern when parallelizing Delaunay refinement algorithms is the compatibility (i.e., data dependence) between Steiner points concurrently inserted by multiple threads or processes. Two points are Delaunay-independent if they can be safely inserted concurrently. PDR is based on overlapping the mesh with an octree, defining buffer zones around each leaf of the octree, and proving that points inserted outside the buffer zone of a leaf are always Delaunay-independent with respect to any points inserted inside this leaf.

There are two approaches to PDR, progressive and non-progressive, both of which rely on octree (data) decomposition in order to mathematically guarantee element quality and termination of the PDR algorithm for uniform isotropic Delaunay-based methods.

PDR is used with TetGen 1.4 which can be found here.

Compiling PDR (Shared Memory Release)

The PDR source code is provided as a compressed tar archive, which is available here. It can be extracted using the tar utility.

tar xvzf PDR-buildnumber.tar.gz

After extracting PDR, cd into the PDR directory. To perform an out-of-source-build, create a compilation directory.

mkdir build
cd build


Run cmake followed by make.

cmake ..
make

Two executables will be created:

  • pdr: non-progressive pdr
  • pdr_p: progressive pdr

Tool Configuration on Linux

PDR requires g++ 4.7 or higher and cmake. Both utilties, can be installed with the package manger for your Linux distribution (e.g., apt-get for Ubuntu and yum on CentOS).

Compilation has been performed and tested on CentOS with g++ version 4.9, Ubuntu with g++ versions 4.8.4, 4.9, and 5.3.1.

Tool Configuration on OSX

PDR requires g++ 4.7 or higher and cmake. CMake configuraiton and installation official instructions are provided by Kitware. If the CMake GUI is already installed in the /Applications directory, the command line tool can be activated by running

sudo "/Applications/CMake.app/Contents/bin/cmake-gui" --install

The gcc compiler included with xcode is an earlier version. The gcc47 package can be installed using the macports framework.

Compiling PDR (Initial MPI Release)

The PDR source code is provided as a compressed tar archive, which is available here. It can be extracted using the tar utility.

tar xvzf PDR-buildnumber.tar.gz

After extracting PDR, cd into the PDR directory. To perform an out-of-source-build, create a compilation directory.

mkdir build
cd build

Run cmake followed by make.

cmake ..
make

One executable will be created:

  • pdr: non-progressive pdr

Tool Configuration on Linux

Compilation requires cmake and version 4.9.3 of the g++ compiler and openmpi 2.0.1 or higher.

Using PDR (Shared Memory Manual Page)

Running PDR without flags or arguments will display the following usage message:

Usage: ./pdr -i [inputfilename]
-i -> Specify an input poly file (required)
-o -> Specify a base output filename
-s -> Specify a statistics output filename
--grading -> Specify a uniform upper bound for circumradii
--initial-depth -> Specify a depth limit for the initial octree
--max-depth -> Specify a maximum depth for the final octree (progressive mode)
--scale -> Specify the factor by which to scale the octree root
--nooutmesh -> Suppress output of node and ele files
--nooutoctree -> Suppress output of the generated octree

Input & Output

PDR requires that the –i flag be used to specify an input geometry.

./pdr –i cube.poly

By default, the base output filename will default to outputMesh. This can be overridden with the –o flag.

./pdr –i cube.poly –o refinedCube

This will result in three files, refinedCube.node, refinedCube.ele, and refinedCube-octree.vtk. The first two files contain the points and tetrahedra, respectively. The third file contains the final octree.

Mesh or octree output can be suppressed with --nooutmesh and --nooutoctree, respectively.

Input File Format

PDR accepts input as PLCs in the poly file format as described in the TetGen documentation with three restrictions:

  1. No leading comments can be present.
  2. The first line must contain 4 integers.
  3. If no holes are present, the optional holes section must be included with a 0.

The unit cube is provided as an example in cube.poly. The poly file must not contain any leading comments.

Running PDR (Shared Memory Sample Execution)

This page describes both the use of the shared memory PDR release and the results for four example geometries:

  • Unit Cube
  • Brain
  • Socket
  • Bar3

The mesh quality statitstics, shown in the graphs on the remainder of this page, were generated by reconstructing the mesh with Tetgen. Future versions of PDR will generate the statistics natively when the correct command line arguments are provided.

Unit Cube

When run on the unit cube using the following command:

./pdr -p 4 -s statistics.txt --grading 0.015 --initial-depth 4 -i cube.poly

PDR will generate a mesh of approximately 2 million tetrahedra using four cores. Four files will be generated:

  • output.node - Listing of all vertices - Note that this file is output as a text file. The version provided here is compressed into a zip file.
  • output.ele - Listing of all terahedra - Note that this file is output as a text file. The version provided here is compressed into a zip file.
  • output-octree.vtk - Listing of the final octree in VTK format - This is compressed into a zip file.
  • statistics.txt - Listing of time statistics - Note that these times will vary based on hardware.
Note: Some of the above files are large. Each of them can be opened in a text editor.

Brain

This section describes the results obtained from the brain_cbc3d geometry for a single core and 32 cores.

Input Mesh

Brain CBC3D.png

Command for Single Core Execution

./pdr -p 1 -s pdr-np-01-1.0-depth-04-06-brain_CBC3D.txt --grading 1.0 --initial-depth 4 -o pdr-np-01-1.0-depth-04-06-brain_CBC3D

Command for 32 Core Execution

./pdr -p 32 -s pdr-np-32-1.0-depth-04-06-brain_CBC3D.txt --grading 1.0 --initial-depth 4 --max-depth 6 -o pdr-np-32-1.0-depth-04-06-brain_CBC3D

Argument Settings Used

-p 1 - set the number of cores
-s pdr-np-01-1.0-depth-04-06-brain_CBC3D.txt - set the file name for time statistic output
--grading 1.0 - set the grading
--initial-depth 4 - set the initial octree depth
--max-depth 6 - set the maximum octree depth (ignored in non-progressive mode)
-o pdr-np-01-1.0-depth-04-06-brain_CBC3D - set the base output file name
-i brain_CBC3D.poly - set the input file

Single Core Statistics

  • Dihedral Angle Results
  • Face Angle Results
  • Aspect Ratio Distribution

32 Core Statistics

  • Dihedral Angle Results
  • Face Angle Results
  • Aspect Ratio Distribution

Socket

This section describes the results obtained from the socket geometry for a single core and 32 cores.

Input Mesh

Socket.png

Command for Single Core Execution

./pdr -p 1 -s pdr-np-01-1.0-depth-04-06-socket.txt --grading 1.0 --initial-depth 4 --max-depth 6 -o pdr-np-01-1.0-depth-04-06-socket -i socket.poly

Command for 32 Core Execution

./pdr -p 32 -s pdr-np-32-1.0-depth-04-06-socket.txt --grading 1.0 --initial-depth 4 --max-depth 6 -o pdr-np-32-1.0-depth-04-06-socket -i socket.poly

Argument Settings Used

-p 1 - set the number of cores
-s pdr-np-01-1.0-depth-04-06-socket.txt - set the file name for time statistic output
--grading 1.0 - set the grading
--initial-depth 4 - set the initial octree depth
--max-depth 6 - set the maximum octree depth (ignored in non-progressive mode)
-o pdr-np-01-1.0-depth-04-06-socket - set the base output file name
-i socket.poly - set the input file

Single Core Statistics

  • Dihedral Angle Results
  • Face Angle Results
  • Aspect Ratio Distribution

32 Core Statistics

  • Dihedral Angle Results
  • Face Angle Results
  • Aspect Ratio Distribution

Bar3

This section describes the results obtained from the bar3 geometry for a single core and 32 cores.

Input Mesh

Bar3.png

Command for Single Core Execution

./pdr -p 1 -s pdr-np-01-0.03-depth-04-06-bar3.txt --grading 0.03 --initial-depth 4 --max-depth 6 -o pdr-np-01-0.03-depth-04-06-bar3 -i bar3.poly

Command for 32 Core Execution

./pdr -p 32 -s pdr-np-32-0.03-depth-04-06-bar3.txt --grading 0.03 --initial-depth 4 --max-depth 6 -o pdr-np-32-0.03-depth-04-06-bar3 -i bar3.poly

Argument Settings Used

-p 1 - set the number of cores
-s pdr-np-01-0.03-depth-04-06-bar3.txt - set the file name for time statistic output
--grading 0.03 - set the grading
--initial-depth 4 - set the initial octree depth
--max-depth 6 - set the maximum octree depth (ignored in non-progressive mode)
-o pdr-np-01-0.03-depth-04-06-bar3 - set the base output file name
-i bar3.poly - set the input file

Single Core Statistics

  • Dihedral Angle Results
  • Face Angle Results
  • Aspect Ratio Distribution

32 Core Statistics

  • Dihedral Angle Results
  • Face Angle Results
  • Aspect Ratio Distribution

Using PDR (MPI Manual Page)

This page describes the available command line arguments, input format, and output files for the intial MPI release of PDR with TetGen.

Current alpha version of MPI PDR Release works only with the unit cube and bar3 geometries!

Running PDR without flags or arguments will display the following usage message:

Usage: mpirun -np [numberofnodes] pdr -i [inputfilename]
-i -> Specify an input poly file (required)
--grading -> Specify a uniform upper bound for circumradii
--initial-depth -> Specify a depth limit for the initial octree

Input & Output

PDR requires that the –i flag be used to specify an input geometry.

mpirun -np 8 pdr –i cube.poly

By default, the base output filename will default to outputMesh.

This will result in three files, outputMesh.node, outputMesh.ele, and outputMesh-octree.vtk. The first two files contain the points and tetrahedra, respectively. The third file contains the final octree.

Input File Format

PDR accepts input as PLCs in the poly file format as described in the TetGen documentation with three restrictions:

  1. No leading comments can be present.
  2. The first line must contain 4 integers.
  3. If no holes are present, the optional holes section must be included with a 0.

Running PDR (MPI Sample Execution)

This page describes both the use of the initial MPI release of PDR with TetGen and the results for two example geometries: Current alpha version of MPI PDR Release works only with the unit cube and bar3 geometries!

Unit Cube

When run on the unit cube using the following command:

mpirun -np 8 pdr --grading 0.015 --initial-depth 3 -i cube.poly

PDR will generate a mesh of approximately 2 million tetrahedra using eight nodes. The following shows the resulting mesh.

Cube-whole.png

Bar3

This section describes the results obtained from the bar3 geometry when run on 16 nodes.

Input Mesh

Bar3.png

Command for 16-node Execution

mpirun -np 16 pdr --grading 0.015 --initial-depth 3 -i bar3.poly

Argument Settings Used

--grading 0.015 - set the grading
--initial-depth 3 - set the intial octree depth
-i bar3.poly - set the input file

The following shows the resulting mesh.

Bar3Result.png

Heterogeneous Data (Sample Mesh)